(Optional) Mounting the Dome Camera to a Pipe

This procedure requires a 1-1/2" NPT-female to 1-12" NPT-female pipe adapter. It is recommended that the NPT adapter be mounted to a 1-1/2" conduit pipe.

1. Pull the required cables through the NPT conduit pipe.
2. Apply thread seal tape to the pipe and screw on the 1-1/2" NPT female to NPT female pipe adapter.
3. Screw the lock nut onto the pendant back box.
4. Apply thread seal tape to the NPT adapter and screw it into the pipe adapter.

   Make sure the parts are assembled in this order from NPT conduit pipe to pendant back box:

   1. NPT conduit pipe
   2. 1-1/2" NPT female to female pipe adapter
   3. Lock nut
   4. Pendant back box

   

5. Refer to steps 5-13 in this section for more information: (Optional) Mounting the Dome Camera to the Pendant Wall Mount.
6. Verify all connections on the cloud-native H6A PTZ camera with pipe mount are assembled correctly.