Overview

The Avigilon Alta cloud-native H6SL dome cameras provide direct-to-cloud connections to Alta Video, the Avigilon Alta cloud-based security platform.

Camera Base Front View

  1. IR Illuminator

    Provides scene illumination in the IR spectrum.

    2. Only available on IR models.

  2. Ethernet port

    Accepts power and Ethernet connection to the network. Server communication and image data transmission also occur over this connection.

  3. Link LED indicator

    Amber LED indicates if there is an active connection in the Ethernet port.

  4. Connection status LED indicator

    Green LED provides information about device operation.

  5. microSD card slot

    Holds the microSD card for onboard storage.

Camera Base Rear View

Displayed IR illuminators only available on -IR models.

  1. Azimuth control

    Provides control of the image angle.

  2. Microphone port

    Provides connection to the Microphone accessory (ACMICR-1001). Indoor models only.

  3. I/O connector block

    Provides connections to external input/output and audio devices.

  4. Tilt lock thumb screw

    Provides a locking mechanism for the image tilt adjustment.

  5. Serial number tag

    Device information, product serial number and part number label.

  6. I/O Cable Management Clip

    Clip to help secure the I/O cable in place.

Camera Base Bottom View

  1. Cable entry hole

    An entry hole for the cables required for camera operation.

  2. Lanyard anchor

    The safety lanyard attaches to the anchor to prevent the camera from falling during installation.

  3. Vent

    Vent to allow moisture vapor to escape the sealed housing and equalize pressure.

Cover View, Surface Mount

  1. Dome cover

    Vandal resistant dome cover.

  2. Surface mount adapter

    Used to mount the dome camera to a wall, ceiling or electrical box.

  3. Tamper resistant screws

    Star-shaped captive screws to fix the dome cover to the mount adapter.

  4. Side cable entry cover

    Covers the side cable entry hole.

Mounting Adapter View, Surface Mount

  1. Lanyard

    Connects to the lanyard anchor on the camera base.

  2. Camera housing clips

    Snaps to hold camera module during installation.

  3. Cable entry hole

    An entry hole for the cables required for camera operation.

  4. Mounting holes

    Holes for mounting the adapter to the following:

    • A — UK standard single gang box
    • B — Octagon gang box
    • D — US standard single gang box

(Optional) Cover View, In-Ceiling Mount

  1. In-ceiling mount adapter

    Used to mount the dome camera to a wall, ceiling or electrical box.

  2. Dome cover

    Vandal resistant dome cover.

  3. Tamper resistant screws

    Star-shaped captive screws to fix the dome cover to the mount adapter.

(Optional) Mounting Adapter View, In-Ceiling Mount

  1. Camera housing clips

    Snaps to hold camera module during installation.

  2. Lanyard

    Connects to the lanyard anchor on the camera base.

  3. Clamps

    Manually adjustable clamps for securing the dome camera to the ceiling.

  4. Clamp retainer

    Used to hold the clamps together before installation.

(Optional) Cover View, Pendant Wall Mount

  1. Pendant wall mount

    Used with the NPT adapter to mount the dome camera to a wall in pendant installations.

  2. NPT adapter

    Used to mount the dome camera to NPT pipes.

  3. Tamper resistant screws

    Star-shaped captive screws to fix the dome cover to the mount adapter.

  4. Dome cover

    Vandal resistant dome cover.

(Optional) NPT Adapter View, Pendant Mount

  1. Camera housing clips

    Snaps to hold camera module during installation.

  2. Lanyard

    Connects to the lanyard anchor on the camera base.

  3. 1-1/2” NPT thread mount

    Standard male 1-1/2" NPT thread mount for mounting the dome camera to a pole or bracket.

(Optional) Pendant Wall Mount View

  1. 1-1/2” NPS thread mount

    Female NPS thread mount for pendant camera installations.

  2. Pendant wall mount screws

    Screws for securing the pendant wall mount to the mounting bracket.

  3. NPT pipe entry hole

    A 3/4” NPT threaded hole for NPT pipe conduits.

Pendant Wall Mount Bracket View

  1. Bracket mounting holes

    Points for mounting the pendant wall mount bracket to a mounting surface.

  2. Mounting tabs

    Tabs for placing the pendant wall mount onto the bracket.

  3. Mounting points

    Points for securing the pendant wall mount to the mounting bracket.