Add walls to your site maps

Last modified: Thursday December 11, 2025.

To improve the positioning of detected objects on maps, you can add the position of walls and room dividers.

Video demo

Before you start

Upload a map and associate it with the site. See Upload site maps to Map view.

Add walls to a site map

1. Choose Tools > Map view.
2. Select Edit mode
3. Expand Maps .
4. Expand the required site.
5. Select the required map.
6. Click Enter wall edit mode.
7. To draw a single wall:
   1. Click and select
   2. Click to position the starting point.
   3. Click to position the end point.
   4. To draw another wall, click an empty part of the map and then click to place a new starting point.
8. To draw linked walls:
   1. Click and select
   2. Click to position each point in the wall.
   3. Press the Escape key or double-click to complete the wall.
9. To draw a rectangular wall:
   1. Click Rectangle wall.
   2. Click and drag to position the walls.
10. To finish, click Done and select View mode .

After adding walls to your maps, set your camera fields of view. See Add camera positions to your site maps and Set camera fields of view.

Edit or delete map walls

1. Choose Tools > Map view.
2. Select Edit mode
3. Expand Maps.
4. Expand the required site.
5. Select the required map.
6. Click Enter wall edit mode.
7. Click in the center of the required wall.
   1. Click and drag endpoints or joints to adjust the position.
   2. To delete the selected wall, press the Delete key.
8. To finish, click Done and select View mode .